Structural Acrylic Glues

We are pleased to offer the complete range of Scigrip structural adhesives. Structural acrylic adhesives (methacrylate’s) are premium grade toughened adhesives that are used to create exceedingly strong structural bonds to a wide variety of substrates. They fill the gap between epoxy & polyurethane chemistry with exceptionally high toughness, fatigue resistance and overall ease of use. These adhesives are characterised by needing minimal surface preparation.

Renewable Energy

Renewable Energy

All of these adhesives are two component products applied using either a 1:1 application gun or a 10:1 application gun. 400 ml & 490 ml application guns can be either manual or pneumatic.

These adhesives are all room temperature cure products and offer working times between 2 minutes and 130 minutes. They are available in various pack sizes including 50 ml, 400 ml & 490 ml. These products represent a very unique niche within our adhesive chemistry portfolio. With a range of working times to suit all manufacturing processes and a range of tensile strengths form 3000 PSI to an incredible 4785 +.

Building & Construction

Building & Construction

These adhesives can attach many dissimilar materials such as composite, steel, aluminium, polycarbonate & acrylic. The high shear, high tensile strength and very high impact resistance properties allows for attaching of bolts, metal supports and sink fasteners. Some of these products are exceptionally suitable for bonding both bigHead® & TwinDisk® fasteners.

They are also used in the manufacture of wind turbines, boat repair, farm machinery, composite metal bonding in transportation, and in the security sector for bonding reinforcing frames etc. The most common applications are as metal glues, is in structural bonding applications. We offer all of these adhesives from stock, along with the respective application guns, static mixing nozzles  and tips.

Proud partners of Scigrip

Proud partners of Scigrip

SG200

Two component 10:1 mixing ratio. Working times of  15 minutes & 40 minutes. Tensile strength of over 2900 PSI. A speciality high viscosity non sag adhesive which shows excellent durability and very high peel strengths. The adhesive has very high salt & UV resistance. Typically used in structural composite bonding applications such as bonding Epoxy, Polyester, Vinyl Ester and Gelcoats. Also suitable for bonding ABS, Acrylics, PVC/CPVC, Styrenics etc.

SG230-HV

Two component 10:1 mixing ratio. Working times of 30 minutes to 130 minutes. Tensile strength of over 3000 PSI. A very high viscosity non sag adhesive which shows excellent gap filling properties. Excellent durability and permanent toughness and elasticity. Excellent environmental resistance. Typically used in large bonding applications such as composites, plastic such as polycarbonate & ABS. Excellent for use in filling gaps up to 40 mm. Used in wind turbine applications, boat fabrication & repair, tank fabrication etc.

SG300 Two component 10:1 mixing ratio. Working times 5 to 40 minutes. Tensile strength of over 2000 PSI. An excellent all round high performance primerless structural adhesive with excellent peel & shear strength. Commonly used to bond metals such mild steel, aluminium & stainless steel. Excellent adhesion to various plastics including HIPS, ABS & Acrylic. Excellent adhesion to composites such as Carbon Fibre, Polyester, CPVC, Vinyl , GRP etc. Due to its read through, the choice adhesive for the truck, bus and rail sector
SG600 Two component 10:1 mixing ratio. Working times of 5 minutes to 18 minutes. Tensile strength of  over 3200 PSI. High performance all purpose structural adhesive for plastics and composites. Produces a very low exotherm with excellent peel, shear and impact resistance. Excellent flow and wet-out of surfaces. Excellent adhesion to various plastics including HIPS, ABS, PVC/CPVC & various Acrylics. Excellent adhesion to composites such as polyester, Epoxy, Vinyl , Polyester, DCPD Polyester,
SG5000 Two component 1:1 mixing ratio. Tensile strength of over 5500 PSI. Working times 4 minutes to 18 minutes. A high performance structural adhesive with excellent peel & shear strength. Commonly used in all general purpose applications. Will to bond metals such mild steel, aluminium & stainless & mild steel. Excellent adhesion to various plastics including ABS, Acrylics, Vinyl, PVC and Polycarbonate.  Excellent adhesion to composites such as FRP, Epoxy, Polyester, Vinyl Ester & Gelcoats. The choice product for diverse applications requiring chemical & environmental resistance.
PPX5 Two component 10:1 mixing ratio. Working time 20 minutes. A bespoke adhesive for bonding low surface energy plastics such as Polyethylene, Polypropylene, Polycarbonate, Thermoplastic Polyolefin etc. Also suitable for bonding dissimilar materials, such as plastics to metals, including aluminium, stainless steel, mild steel etc. Very low odour. Excellent for fabricating items with small gluelines.
SG42 Two component 10:1 mixing ratio. Tensile strength of over 2600 PSI. Working times 20 minutes. A unique water clear adhesive commonly used in the plastic fabrication sector where it is used to bond both extruded cell cast and continuous cast acrylic. Also suitable for bonding polyester, butyrate etc. Produces crystal clear ‘museum quality joints.
 X15 Two component 1:1 Mixing Ratio. Working time 4 minutes. Tensile strength 4785 PSI. A speciality rubber toughened adhesive which combines exceptionally high shear peel & impact strength with excellent temperature resistance. The premium adhesive for bonding various types of metal including Copper, Chrome Steel , Nickel, Brass, Stainless Steel and Galvanized Steels. The product is commonly used in the fabrication of fire & security doors where it offers very high service temperatures.