If you are using our glue in Ireland or anywhere else, our primers & activators are very important products, especially when using either our anaerobic or cyanoacrylate adhesives.
Primers are particularly useful if difficult to bond to plastics or elastomers such as silicones, Santoprene® ,EPDM, Suryn® & Teflon® , polypropylene, polyethylene PTFE, Neoprene® and Viton® are bonded. Our cyanoacrylate & anaerobic activators are the most active products in the sector and give instant problem free curing to the selected adhesive.
|X80||A MIL spec ACT T solvent based highly active activator which is used to increase the cure speed of our anaerobic adhesives. It is typically used on passive metals or other inert surfaces.For use with anaerobic adhesives only and should not be used with our Cyanoacrylate Adhesives (CA’s)|
|X85||A unique non yellowing low bloom activator used to increase the cure speed of our complete range of cyanoacrylate adhesives using the post application method. X85 is typically used to post cure fillets of adhesive and finds use in the model/prototyping sector, mechanical assembly and loud speaker fabrication. X85 is for use with Cyanoacrylate Adhesives only and should not be used with Anaerobic Adhesives.|
|X90||A speciality primer designed for use in bonding certain types of plastics & elastomers. Typically used in bonding traditionally difficult to bond materials such as silicones, Santoprene® ,EPDM, Suryn® & Teflon® , polypropylene, polyethylene PTFE, Neoprene® and Viton® .This product is not recommended for materials other then plastics. It as shown excellent results with our X60 adhesive.X90 is not suggested for use with CA gel products.|